Etnica 1gr Evolution
preinfusion and extraction Flow-Time graph
Displays of the dispensing status
Using the touch screen, the quantity of water and its time both in preinfusion and dispensing are displayed in real time.
For coffee roasters and professional baristas it is also possible to view a real time Flow-Time graph (FLOW RATE) that traces the profile of the preinfusion and dispensing flow of coffee spaced over time. These parameters are also displayed with simultaneous dispensing from each group.
Preinfusion and coffee dose programming
Programming of 4 preinfusion times for the E61 group.
Programming of the total volume of doses.
Boiler steam pressure management
The boiler pressure is controlled via a high-precision pressure transducer which allows adjustment of the boiler temperature via the display, with a greater adjustment range. To provide additional safety and continuity of work, the transducer is supported by an NTC probe which, in addition to detecting the temperature in the boiler, can also control it in the event of the pressure transducer not working. The precision and speed of repetition of the readings of the pressure values leads to a stability and reactivity of the thermal of the machine as the pressure of the boiler varies by a few hundredths of a bar which is equivalent to a very limited thermal oscillation of approximately 0,2°C compared to at 3,5°C of a machine with a traditional thermoregulation system with an electromechanical pressure switch in which during thermal maintenance, pressure variations of the order of 0.2 bar occur. With this pressure control, Etnica Evolution maximizes the thermal stability of the machine even during intensive use, significantly increasing its thermal capacity.
Energy saving
It is emphasised during all stand-by thanks to the independent electronic control of each one of 3 legs of the heating element, where the consumption drops to 1000 watt from a peak of 3000 watt. Etnica Evolution 1gr. is available with a 6.5 lt copper boiler of greater thickness (diam. 205mm) equipped with a certified 10mm thick insulation for further energy saving.
Back up functions
1 semiautomatic button for coffee, manual refilling, NTC probe support.
Easy maintenance through:
- removable drawer housing all the machine’s electrical and electronic controls
- intuitive wiring
- manual boiler water refill
- easy replacement of boiler water inlet solenoid valve
Other accessory functions:
alarm alerts, bar's day off, language, turning the machine on/off, counter page, electric cup heater (with ON/OFF switch) with programmable working temperature, customizing the barista password, adjusting the sensitivity of the level probe based on the hardness of the water, programming and warning of maintenance cycles, filter replacement, boiler load synchronization, maximum boiler load time.
Optional: external motor pump (air cooling), cappuccino maker/milk frothing wand, serial interface for external connection to the cash register, white filter holders for 1 and 2 cups, nut wood kit (filter holders and knobs), color options and aesthetic customisation.
Etnica 1gr PID Touch is the Evolution of Etnica 1 group Digit Chrono we created on 2020 dedicated to the "Value of Time" we understood better during all 2020 because of the COVID pandemic. Here following the video we created in 2020.
New Etnica Evolution automatic 1 gr. PID Touch screen, offers modern and complete control of extraction—ideal for coffee shops, expert baristas, roasters, or enthusiasts who demand high performance for high coffee consumption in a professional 1-group machine. Built with the same professional structure as the Etnica Evolution 2-3 group, it integrates a high-precision pressure transducer, NTC, and advanced digital functions.
Displays of the dispensing status
Using the touch screen, the quantity of water and its time both in preinfusion and dispensing are displayed in real time.
For coffee roasters and professional baristas it is also possible to view a real time Flow-Time graph (FLOW RATE) that traces the profile of the preinfusion and dispensing flow of coffee spaced over time. These parameters are also displayed with simultaneous dispensing from each group.
Preinfusion and coffee dose programming
Programming of 4 preinfusion times for the E61 group.
Programming of the total volume of doses.
Boiler steam pressure management
The boiler pressure is controlled via a high-precision pressure transducer which allows adjustment of the boiler temperature via the display, with a greater adjustment range. To provide additional safety and continuity of work, the transducer is supported by an NTC probe which, in addition to detecting the temperature in the boiler, can also control it in the event of the pressure transducer not working. The precision and speed of repetition of the readings of the pressure values leads to a stability and reactivity of the thermal of the machine as the pressure of the boiler varies by a few hundredths of a bar which is equivalent to a very limited thermal oscillation of approximately 0,2°C compared to at 3,5°C of a machine with a traditional thermoregulation system with an electromechanical pressure switch in which during thermal maintenance, pressure variations of the order of 0.2 bar occur. With this pressure control, Etnica Evolution maximizes the thermal stability of the machine even during intensive use, significantly increasing its thermal capacity.
Energy saving
It is emphasised during all stand-by thanks to the independent electronic control of each one of 3 legs of the heating element, where the consumption drops to 1000 watt from a peak of 3000 watt. Etnica Evolution 1gr. is available with a 6.5 lt copper boiler of greater thickness (diam. 205mm) equipped with a certified 10mm thick insulation for further energy saving.
Back up functions
1 semiautomatic button for coffee, manual refilling, NTC probe support.
Easy maintenance through:
- removable drawer housing all the machine’s electrical and electronic controls
- intuitive wiring
- manual boiler water refill
- easy replacement of boiler water inlet solenoid valve
Other accessory functions:
alarm alerts, bar's day off, language, turning the machine on/off, counter page, electric cup heater (with ON/OFF switch) with programmable working temperature, customizing the barista password, adjusting the sensitivity of the level probe based on the hardness of the water, programming and warning of maintenance cycles, filter replacement, boiler load synchronization, maximum boiler load time.
Optional: external motor pump (air cooling), cappuccino maker/milk frothing wand, serial interface for external connection to the cash register, white filter holders for 1 and 2 cups, nut wood kit (filter holders and knobs), color options and aesthetic customisation.
Etnica 1gr PID Touch is the Evolution of Etnica 1 group Digit Chrono we created on 2020 dedicated to the "Value of Time" we understood better during all 2020 because of the COVID pandemic. Here following the video we created in 2020.
